Access Recordings on 4K UHD Camera’s SD Card

The following are steps on how to access the 4K UHD Camera’s internal SD card to view, download, and delete video recordings stored on the camera.

Prerequisites

• A computer with a modern web browser (Chrome/Firefox)

• Up To Date firmware on the Controller and 4K UHD Camera (6.10 and 1.7 minimum)

• Ethernet cable

Set Up

Option 1: PC directly connected to Controller

• Before connecting the ethernet cable, turn ON the DHCP setting on the Controller. This is found in Settings->Network

• Ensure the PC’s network configuration is set up to receive a dynamic IP address over DHCP (This is the default on Windows PCs)

• Connect an ethernet cable between the Controller and the PC

Option 2: PC and Controller each connected to Router

• Before connecting the ethernet cable, turn OFF the DHCP setting on the Controller. This is found in Settings->Network

• Ensure the PC’s network configuration is set up to receive a dynamic IP address over DHCP (This is the default on Windows PCs)

• Connect an ethernet cable between the Controller and a LAN port on the router

• Connect a second ethernet cable between the PC and a LAN port on the router. Alternatively, the PC can be connected to the router by Wi-Fi - however file access may be slower in this case.

Figure 1. Location of DHCP setting on Controller

Steps to Access the Recordings

• Open the Network Settings Page on the Controller. This is found in Settings -> Network Menu.

• Under the Devices section, find the IP address of the 4K UHD Camera you wish to get files from 

Figure 2. Location of Controller IP Address

• Enter the Camera IP address into your computer’s web browser and append :8080 to the end, e.g. if your Camera's IP address is 10.77.0.5, then enter http://10.77.0.5:8080 in your web browser. IMPORTANT: DO NOT FORGET THE 8080 PORT

Figure 3. Example of accessing web page

• Click enter and you’ll be able to visit the Web Page where you can download and delete files on the onboard SD card as desired